Carboxymethyl Cellulose Ceramic Grade
You are here: Home » Products » Carboxymethyl Cellulose » Carboxymethyl Cellulose Ceramic Grade

Products

Share to:

Carboxymethyl Cellulose Ceramic Grade

Carboxymethyl cellulose(CMC) Ceramic Grade is creamy white powder or granular, it can be readily dissolved in water to form clear, viscous solutions.Our Ceramic CMC is particularly suited for use as binders and provides high strength to the unfired substrate even at low dosage while producing excellent plasticity, good suspensions, uniform slurries and low residue upon firing.
Our CMC is used as the most efficient binders,thickeners and stabilizers in ceramic glazing to provide benefits:
* Assisting in the formulation of stable glaze suspensions
* Tailoring the flow and application to the situation
* Directly controlling the drying rate of the glaze as it is applied
* Increasing the mechanical strength of unfired glaze surfaces
* Promoting uniform pigment dispersions for uniform color
We recommend low to medium viscosity CMC with typical addition level 0.1-0.5% against weight depending on the final desired characteristics of the glaze.

Quantity:
  • CMC Ceramic Grade
  • Unionchem
  • 391231

Carboxymethyl cellulose Ceramic Grade

Carboxymethyl cellulose(CMC) Ceramic Grade is creamy white powder or granular, it can be readily dissolved in water to form clear, viscous solutions.Our Ceramic CMC is particularly suited for use as binders and provides high strength to the unfired substrate even at low dosage while producing excellent plasticity, good suspensions, uniform slurries and low residue upon firing.

Our CMC is used as the most efficient binders,thickeners and stabilizers in ceramic glazing to provide benefits:

* Assisting in the formulation of stable glaze suspensions

* Tailoring the flow and application to the situation

* Directly controlling the drying rate of the glaze as it is applied

* Increasing the mechanical strength of unfired glaze surfaces

* Promoting uniform pigment dispersions for uniform color

We recommend low to medium viscosity CMC with typical addition level 0.1-0.5% against weight depending on the final desired characteristics of the glaze.

Besides glazing,our CMC can be used in whole process during ceramic production:

Ceramic production process

Benefits from CMC as additive

Recommend dosage


Dry pressing

Sticky ceramic dry mix powder,Stabilize the ceramic slip,lower green   body shrinkage and higher accuracy for specification tolerance

0.5%-1.0%





Slip casting

Stabilizing the ceramic slip

0.50%


Tape casting

Adjust viscosity and provide strength to the very thin and sensitive   tape casting

6%-7%



Extrusion

Provides plasticity to the substrate in addition to wet/green strength

2%-3%



Injection molding

Provides rheology control during the molding step,Thermoplastic and   less residue during fire stage

5%-20%


Recommend dosage is against weight and adjustable depending on the final desired characteristics.

Rules & regulations:

CAS: 9004-32-4

Packaging: packed in 25kg net multiply paper bags,shrinkwrapped on pallets or as per customer requested design.

Storage: keep original packaging sealed,stored in water-proof,clean and dry conditions.

Shelf life: 2years after production stored as above requested

 

More product and detailed specs available upon request. We dedicated to develop product to meet customer demand properly

 

 

 


QUICK NAV

CATEGORY

CONTACT INFO

 Tel: +86-533-7220272
 E-mail: sales@unionchem.com.cn
 Phone: 13953383796
 Add: Tanjia,Linzi Zibo,Shandong,China
 Skype: arellasun

SUBSCRIBE

Be the first to know about our lastest products.

Feedback
  ​
Copyright © 2018 Unionchem CO.,Ltd. All Rights Resolved. Supported by Leadong. Sitemap